覆岩结构类型与开采覆岩损害特征分析

煤层开采打破了上覆岩层原有的平衡,必然引起岩层的移动、破断,导致应力场和裂隙场的改变,工作面出现矿压显现。上覆岩层的岩性和组合结构对工作面开采覆岩损害特征分布影响显著,一般岩性越坚硬,上覆岩层应力集中程度越高,采动裂隙越发育,矿压显现也越明显;坚硬岩层尤其是关键层对覆岩的破断运动起控制作用,覆岩破断发展到一定层位后软弱岩层往往是抑制覆岩破断进一步向上发展的关键。当工作面上覆岩层同时存在远近场关键层时,近场关键层的周期性破断引起裂隙带范围内岩层的运动和工作面周期来压;而远场关键层的周期性破断导致地表裂缝或台阶下沉,工作面压力急剧上升,有时甚至导致煤矿动压灾害,尤其是远近场关键层同步破断时动力现象更明显。通过地面钻孔使远场关键层提前破断是防止此类动力灾害的关键。     

考虑结构动态变形的缸套-活塞环润滑建模分析

缸套在燃烧冲击和活塞敲击激励下会产生接近表面粗糙度的动态变形,极有可能影响缸套-活塞环组件间的摩擦润滑过程。为了研究缸套动态变形潜在的影响,将动力学仿真获取的缸套内表面的动态变形经过处理后导入到润滑模型中,同时采用数值积分计算的方式对油液压力应力因子和剪切应力因子进行实时计算求解,使仿真计算更加符合实际情况。通过搭建同时考虑缸套变形与油液剪切特性影响的改进润滑模型,计算得到整个工作循环内活塞环上的最小油膜厚度和摩擦力曲线。结果表明:考虑缸套动态变形后的最小油膜厚度和摩擦力曲线出现了明显的波动,而且考虑缸套动态变形后的摩擦力比未考虑之前出现了明显下降。     

喷淋液滴在空气环境下的运动特性

本文以喷淋液滴在空气环境下运动特性为工程背景，建立单个液滴在常温、常压空气环境中的动量方程，分析液滴沉降特性、追赶特性及运动轨迹行为。计算结果表明，不同喷淋液滴初始条件下，短时间内存在重力大于曳力和重力小于曳力两种情况，但最终减速液滴均会达到受力平衡状态；液滴离开喷淋头后，垂向位移均迅速增大，液滴粒径越大、初始速度越大，垂向位移增长的速率也越大，达到相同位移的用时越短；液滴尺寸、初始速度相差越大，液滴追赶所用的时间越短，追赶位移越小，液滴尺寸、初始速度越接近，液滴追赶所用的时间越长，追赶位移越大；液滴初始速度越大、初始直径越大、喷射角度越大，横向速度消失越慢，达到的横向位移越大，喷射液滴覆盖的面积也越大。计算结果有助于优化工程实际中喷淋系统的设计与布置。     

某型发动机自反馈调节阀动态仿真分析

基于FLUENT软件提供的计算方法和物理模型，利用动网格技术及用户自定义函数（User-define Function，UDF），对发动机预燃室调节阀的自反馈调节过程进行动态数值模拟，并分析阻尼参数对调节效果的影响。结果表明：自反馈机构可实现对不同压力扰动的及时响应，具有稳定流量的效果，改变阻尼参数可对调节响应速度和流量稳定性进行优化，其中摩擦力对调节影响最显著。     

Quantitative structure-properties relationship,molecular dynamic simulations and designs of some novel lubricant additives

Quantitative structure-properties relationship (QSPR) method was used to design some novel antioxidant lubricant additives, while molecular dynamics simulations were used to calculate their dynamic binding energies on steel and to hydrogen-containing DLC (a-C: H) crystal surfaces. 29 synthesized antioxidant lubricant additives were collected from literature and geometrically optimized by Spartan’14 version 1.1.2 software while Genetic Function Algorithm (GFA) method of the material studio version 8.0 software was used to build the predictive QSPR model. Four novel antioxidant lubricant additives were successfully designed out of which E)-3-(4-((3-amino-4-methylphenyl)diazenyl)-5-hydroxy-4H-pyrazol-3-yl)-2-argio-6,7-difluoroquinazolin-4(3H)-one with excellent property of 3.531295 (KOH/g) was found to be better than the one reported by other researchers. The dynamic binding energy results revealed that one of the designed additives was excellently bound to steel (?1120.11 kcal/mol) and to hydrogen-containing DLC (a-C: H) crystals surface (7814.156 kcal/mol) surfaces than its co-additives. This investigation shows that the entire studied antioxidant lubricant additive was found to be better bound to the steel surface than hydrogen-containing DLC (a-C: H) crystals surface. This study will help in synthesizing novel anti-oxidant lubricant additives with better additive properties that will slow the tendency of oil to oxidize and will not possess a threat to the environment as the structures do not contain zinc and phosphorus that could limit the operation of the catalytic converter in the exhaust pipe.     

基于协同优化算法的流速仪检定系统设计

提出了一种小型轻便的流速仪检定系统的设计方案,并运用改进的多学科协同优化方法求解各学科设计变量的最优解。首先介绍了算法思想及改进措施,并根据系统设计要求建立了各学科的设计变量、目标函数和约束条件；其次,运用遗传算法求解各学科设计变量的最优解,并根据优化结果完善了系统的设计方案,同时运用计算机仿真等方法验证了优化结果的可行性。结果表明,优化后的检定系统满足流体力学效应、匀速运动时间、系统重量等设计要求,同时证明了协同优化算法解决多学科设计优化问题的有效性。     

Revisiting the Parallel Strategy for DOACROSS Loops

Journal of Computer Science and Technology - DOACROSS loops are significant parts in many important scientific and engineering applications, which are generally exploited pipeline/wave-front...     

Highly Bendable and Rotational Textile Structure with Prestrained Conductive Sewing Pattern for Human Joint Monitoring

Human joints have respective ranges of motion and joint forces corresponding to each kind of joint; this necessitates considerations of the characteristics of human joints to fabricate wearable strain sensors conformable to the human body, and capable of precisely monitoring complex motions of the human body. In the present study, the “all textile‐based highly stretchable structure” that is capable of precisely sensing motions (folding and rotation) of the human joints (finger, wrist, elbow, spine, and knee) is fabricated by optimizing patterns (straight, blind, and zigzag) of conductive yarns employed as the conductive part of the strain sensor, and several textile substrates (braided elastic fabric, knit fabric, and woven fabric), having preferable elasticity and conformability employed for the fabrication of strain sensors suitable for human joints. In particular, the technology, enabling the prestraining of textile substrate, is exploited to fabricate a strain sensor that is capable of outputting selective signals corresponding to the folding motion of the spinal joint over a predetermined angle of motion, and the gait pattern of the wearer of the sensor, attached to his or her knee joint doing folding and rotational motions, is analyzed.     

Policy translation and configuration using dynamic template

To solve the problem of complex,cumbersome and error-prone configuration of security devices caused by the heterogeneous configuration modes in complex networks,a dynamic template-based scheme for translating and configuring policy was proposed.In detail,considering the code’s features,the code-based template for translating policies was constructed to configure the command line conversion,and the keyword comparison method was used to ensure the accuracy of policy configuration.Experiments show that the scalability and the accuracy of the proposed scheme.